Product Manual

Operation
22 Owner’s Manual for Stationary Generators
Menu Navigation
See Figure 4-2.
Feature Description
System Menus
HOME Screen
The system returns to the Ho
me screen if the control panel is not used for five minutes. The screen nor-
mally displays a St
atus message, such as Ready to Run (Auto mode) or Switched to OFF (Off mode), and
the total Hours of Protection. If an active alarm/warning condition occurs, the associated Alarm/Warning
message is displayed. To clear the Alarm/Warning message, press OFF on the control panel followed by
ENTER. In the event of multiple Alarms/Warnings, the next message is then displayed. The highest priority
alarm is always displayed first.
Display Backlight
Normally off. If the operator presses an
y button, the backlight will automatically light and remain on for 30
seconds.
MAIN MENU
Enables the operator to navigate th
e software using UP ARROW, DOWN ARROW, ENTER and ESCAPE.
The Main Menu can be accessed from any sub menu by consecutively pressing ESCAPE. Each time
ESCAPE is pressed, the preceding menu is displayed. The Main Menu is reached when the System, 
Date/Time, Battery, and Sub Menus are displayed.
SUB-MENUS The Sub-Menus screen includes HISTORY, MAINT, EDIT, AND DEALER menus.
HISTORY
The HISTORY screen includes an Al
arm Log and Run Log. The Alarm Log displays the last 50 alarm
events. The Run Log displays the last 50 operational events.
MAINTENANCE
ME
NU
Includes Run Hours, Maintenance Lo
g, and Schedule. Run Hours displays cumulative hours on engine.
Maintenance Log displays the last service warnings and service completions. Scheduled displays when the
next scheduled maintenance interval warning will occur.
EDIT MENU
Includes Language, Current Date/Time, Exercise Settings, Firmware Update, Startup Delay, and Warm up
Time. All of these settings are adjustable without a password.
DEALER MENU
Includes settings that are password protected and can be adjusted by an Independent Authorized Service
Dealer during installation or a service visit.
Navigation
ESCAPE Used to abort a routine or back u
p to the preceding menu.
ENTER Used to make a selection or save an entry.
UP ARROW
DOWN
ARROW
Used to move forward or backward from menu to menu or to scroll forward or backward (increment or dec-
rement) through available selections.
NOTE: Pressing the control
panel illuminates the backlight for 30 seconds. The backlight also illuminates for 30 seconds when-
ever an active Alarm/Warning message is displayed.