Product Manual

Activation and Startup
Owner’s Manual for Stationary Generators 15
Activate Unit
Language
- English +
Up Arrow = (+)
Down Arrow = (-)
Display Reads:
Generator Active is displayed on the
LCD screen when the unit is first
powered up. After displaying firmware
and hardware version codes, as well as
other system information, the Installation
Wizard is launched, and the Language
screen is displayed.
Use UP ARROW or DOWN ARROW to
scroll to desir
ed language.
Press ENTER.
If the wrong language is selected, it may be changed
later u
sing the Edit menu.
Activate me (ENT) or
ESC to run in manual
Display Reads:
Press ENTER. Press ESCAPE to abort the activation sequence. NOT
ACTIVATED is displayed and the generator will run in
manual mode only. Disconnect and reconnect the
negative battery cable to restart the activation routine.
If power is removed after a successful activation, no
data is lost, but the time and date must be updated.
To Activate go to
www.activategen.com
Display Reads:
Go to www.activategen.com or call 1-
888-9ACTIVATE (922-8482, US &
Canada only) if activation passcode is
not available.
If activation pass code is available, wait a
few secon
ds for the next display.
SN 1234567890
PASS CODE XXXXX
Display Reads:
Use UP ARROW or DOWN ARROW to
increment or decrement the digit to
correspond to the first number of the
pass code.
Press ENTER.
Repeat step to enter remaining digits.
Press ESCAPE to return to preceding digits if a
corr
ection becomes necessary.
If attempts to enter the activation code are
unsuccessful,
check the number against the code
given on activategen.com. If it is correct, contact 1-888-
9ACTIVATE (922-8482, US & Canada only).
For
international assistance, call 01-262-953-5155.
Select Hour (0-23)
- 6 +
Display Reads:
Use UP ARROW or DOWN ARROW to
increment or decrement the hour. Press
ENTER.
Use UP ARROW or DOWN ARROW to
increme
nt or decrement the minute.
Press ENTER.
Use UP ARROW or DOWN ARROW to
select the month. Press ENT
ER.
Use UP ARROW or DOWN ARROW to
increme
nt or decrement the date. Press
ENTER.
Use UP ARROW or DOWN ARROW to
increme
nt or decrement the year. Press
ENTER.