Product Manual

General Information
Owner’s Manual for Stationary Generators 7
A complete specification sheet is included in the
documentation provided with the unit at the time of
purchase. For additional copies, contact your local
Independent Authorized Service Dealer.
Thermostat (Full Open) 190° F (88° C)
Lubricating System
Oil Pump Type Gear
Oil Filter Type Full Flow Spin-On Cartridge
Crankcase Oil Capacity
(quarts/liters)
4/3.8 6/5.7 4/3.8
Lubricating Oil Type 5W-30
Air Intake System
Type Naturally Aspirated
Turbo/
Aftercool
ed
Naturally
Aspirate
d
Turbo/
Aftercool
ed
Naturally Aspirated
Turbo/
Aftercool
ed
Exhaust System
Breather Closed Open Closed Open Closed Open
Exhaust Flow at 
Rated Output 60 Hz
165 cfm 203 cfm 180 cfm 237 cfm 300 cfm 420 cfm 300 cfm 420 cfm 414 cfm 494 cfm
Exhaust Temperature at Rated
Output
900° F
(482° C)
1100° F
(593° C)
1000° F
(538° C)
1130° F
(610° C)
1075° F
(579° C)
1100° F
(593° C)
1075° F
(579° C)
1100° F
(593° C)
1025° F
(552° C)
1050° F
(566° C)
Electrical System
Battery Charge 
Alternator
12V,
30 Amp
12V,
15 Amp
12V,
30 Amp
12V,
15 Amp
12V, 30 Amp
Recommended Battery Group 26 Group
24F
Group 26
Static Battery Charger 2.5 Amp
Governor System
Type Electronic
Frequency Regulation Isochronous
Steady State 
Regulation
+/- 0.25%
Voltage Regulator
Type Electronic
Sensing Phase Single
Regulation +/- 1%
Fuel System
LP Fuel Pressure 11-14” WC
NG Fuel Pressure 5-14” WC
Model 22 kW 25 kW 27 kW 30 kW 32 kW 36 kW 38 kW 45 kW 48 kW 60 kW
Engine 2.4L 1.5L 2.4L 1.5L 2.4L 2.4L 2.4L 2.4L 5.4L 2.4L