Product Manual

Owner’s Manual for Trimmer/Mower™ 5
General Information and Setup
Section 2: General Information and Setup
Figure 2-1. Features and Controls
A complete specification sheet is included in the
documentation provided with the unit at the time of
purchase. For additional copies, contact Generac
Customer Service at 1-888-436-3722 (1-888-
GENERAC), or www.generac.com
Emissions
The United States Environmental Protection Agency (US
EPA) (and California Air Resources Board (CARB), for
engines/equipment certified to California standards)
requires that this engine/equipment complies with exhaust
and evaporative emissions standards. Locate the emissions
compliance decal on the engine to determine applicable
standards. For emissions warranty information, please ref-
erence the included emissions warranty. It is important to
follow the maintenance specifications in the manual to
ensure that the engine complies with the applicable emis-
sions standards for the duration of the product’s life.
005826
A
B
F
E
D
G
H
C
A Handlebar Adjuster
B Oil Fill
C Recoil Starter
D Bail Bar
E Fuel Fill
F Fuel Primer
G Quick-Lock™ Trimmer Head
H Trimmer Guard
Trimmer/Mower™ Specifications
Cutting Width 22 in (55.88 cm)
Cutting Height
Three Position, 2 in (5 cm),
2.75 in (7 cm), 3.25 in (8.26 cm)
Cutting Speed
3700 rpm
Cord Size
0.175 in (4.45 mm)
225 mil sawtooth available
Wheels 16 in (30.64 cm)
Frame 14 Gauge Steel
Mow-Ball®
4 in (41 cm) Diameter, Super-Tough
Nylon
Drive Belt
V-Belt, 3L440R
Machine
Dimensions
35 in x 22.25 in x 24 in
(88.9 cm x 56.5 cm x 60.9 cm)
Machine Weight
57 lbs (26 kg)
Handlebar Height
31 in – 49 in
(78.7 cm – 124.5 cm)
Accessories
Premium Generac Pro Trimmer Cord
(225-mil Sawtooth Cord, 82' Roll),
Quick-Lock Pre-Cut Cord (155-mil
green, 13", 48 Pk), Quick-Lock™ Pre-
Cut Cord (13" Pre-Cut 175-mil, 48 Pk),
DuraBlade® Kit for Trimmer Mower,
TrimSafe Guard Kit
Engine Specifications
Engine Generac G-Force
Starting Type Manual
Fuel Tank Capacity .21 gal (.8 L)
Oil Capacity 16.9 oz (.5 L)
Oil Type
See chart in
Adding Oil.
Spark Plug TORCH K7RTC or equivalent
Spark Plug Gap .019-.027 in (0.5-0.7 mm)