Use And Care Manual

Owner’s Manual for Chipper/Shredder 9
General Information and Setup
Know Your Chipper/Shredder
See Figure 2-1. Be familiar with the controls and features
of the unit prior to operation. Read this manual thor-
oughly before assembling and operating this unit. Save
this manual for future and immediate reference.
Emissions Information
See the engine manual for more information.
Remove Contents From Carton
See charts below for list of included parts. Verify all parts
are included before assembling.
NOTE: Do not discard packaging materials until assem-
bly is complete and all parts accounted for.
Supplied Parts
Attaching Tow Bar
1. See Figure 2-2. Place base on jack stands. Verify
frame is level with ground.
Figure 2-2. Place Unit on Jack Stands
2. See Figure 2-3. Position support leg (A) in the
down position. Secure using pin and hitch clip (B).
Figure 2-3. Attach Tow Bar
Parts Supplied on Shipping Pallet
Description Qty
Tow bar 1
Shredder hopper 1
Chipper hopper 1
Poly bag 1
Hitch 1
Parts Supplied in Poly Bag
Description Qty
Owner’s manual 1
Engine manual 1
Warranty Card 1
Hardware bag (plastic) 1
Safety chains 2
Hitch leg 1
Safety glasses 1
(000100a)
WARNING
Consult Manual. Read and understand manual
completely before using product. Failure to
completely understand manual and product
could result in death or serious injury.
Parts Supplied in Hardware Bag
Description Qty
5/16 in - 18 x 3/4 in Carriage bolt 4
5/16 in - 18 x 3/4 in Bolt 4
5/16 in Flat washer, USS 8
5/16 in - 18 Lock nut 8
3/8 in - 16 Lock nut 4
3/8 in - 16 x 3 in Bolt 3
1/2 in - 13 x 3 in Bolt 2
1/2 in - 13 Gripco™ lock nut 2
3/8 in - 16 x 3.5 in Bolt 1
3/8 in Flat washer 2
5/16 in - 18 x 1 in Bolt 4
Knife gauge 1
Pin and hitch clip 1
006491
006492
B
A