GPS Receiver User Manual

2 zūmo 665 Owner’s Manual
Using Trafc Information
Using Trafc Information
Depending upon the trafc receiver
connected to your zūmo, you can receive
XM NavTrafc content or FM Trafc
Message Content (TMC) trafc updates.
Your zūmo displays both types of trafc
content in the same manner.
NOTES:
The GXM 40 antenna and a subscription
to XM services are required to access
XM NavTrafc. XM NavTrafc may
not be available in all areas. For more
information about receiving XM signals,
see page 20.
An optional FM trafc receiver is
required to receive FM TMC trafc
updates and is only compatible with the
zūmo auto mount.
Garmin is not responsible for the
accuracy of the trafc information.
For more information, see www.garmin
.com/trafc.
Receiving Trafc
Information
To power outlet n car
Internal antenna
To power connector on the cradle
To receive trafc information, the following
conditions must be met:
The GXM 40 antenna or FM trafc
receiver must be connected to the zūmo.
The GXM 40 antenna or FM trafc
receiver, and the zūmo, must be
connected to an external power source.
The FM trafc receiver and the zūmo
must be in data range of an FM station
transmitting trafc information.
NOTE:
Heated (metallized) windshields
could degrade the performance of the trafc
receiver.
Trafc in Your Area
When you are receiving trafc information,
a trafc icon appears in the upper-right
corner of the Map page. The trafc icon
changes color to indicate the severity of
trafc conditions on your route or on the
road you are currently traveling.
Severity Color Code
Color Description Meaning
Green Low severity
Trafc is owing
normally.
Yellow
Medium
severity
Trafc is slightly
congested.
Red High severity
Trafc is heavily
congested or
stopped.
Gray No Data
Trafc data has
not updated.