GPS Receiver User Manual

zūmo 665 Owner’s Manual 1
Using the Main Pages
Compass
You can navigate using a GPS compass. No
calibration is required; however, you must
have a clear view of the sky. When you are
traveling, the compass rotates.
The compass is located on the Trip Computer
page, which you can access by touching one
of the data elds to the side of the Menu
button.
Changing Data Fields
You can display different information when
you are driving and routing.
1. While navigating a route, touch a data
eld in the lower left corner or lower right
corner of the Map page.
2. On the Trip Computer page, touch a data
eld you would like the map to display.
Resetting Trip Information
To ensure accurate trip information, reset the
trip information before beginning a route.
1. While on the map page, touch a data eld
to access the Trip Computer page.
2. Touch
Reset and then select an option:
Touch Max. Speed to reset the maximum
speed.
Touch Trip Data to reset the information
on the Trip Computer page.
Touch Fuel Gauge to reset the fuel gauge
on the trip computer.
On the Reset page, touch Fuel Settings to
enable the fuel gauge.
Enabling Fuel Tracking
When connected to the motorcycle mount,
your zūmo can alert you when your fuel tank
is low.
Touch Tools > Settings > Fuel Gauge.
Fuel Tracking—touch On. A Fuel Gauge
appears under the compass on the trip
computer page.
Distance Per Tank—enter the total distance
your motorcycle can travel on a tank of fuel.
•
•
•
Low Fuel Warning—select when you
would like to be notied that your fuel tank
is low.
Using the Fuel Alarm
When your fuel tank is low enough to trigger
the Remaining Fuel Alarm, a red fuel-pump
icon appears on the Map page. Touch the
icon to view a list of nearby gas stations.