Product Manual
Table Of Contents
- Owner’s Manual 60 Hz Air-Cooled Generators
- Table of Contents
- Section 1: Safety Information
- Section 2: General Information
- Section 3: Operation
- Site Prep Verification
- Generator Enclosure
- Auxiliary Shutdown Switch
- Control Panel Interface
- Using the AUTO/OFF/MANUAL Buttons
- Operating Modes
- Interface Menu Displays
- Menu System Navigation
- Setting the Exercise Timer
- Battery Charger
- Manual Transfer Operation
- Automatic Transfer Operation
- Automatic Sequence of Operation
- Shutting Generator Down While Under Load or During a Utility Outage
- Section 4: Maintenance
- Maintenance
- Preparing for Maintenance
- Performing Scheduled Maintenance
- Service Schedule
- Checking Engine Oil Level
- Changing the Oil and Oil Filter
- Servicing the Air Cleaner
- Spark Plug(s)
- Valve Clearance Adjustment
- Battery Maintenance
- Cleaning the Sediment Trap
- Post Maintenance Checks
- Attention After Submersion
- Corrosion Protection
- Remove From and Return To Service Procedure
- Section 5: Troubleshooting / Quick Reference Guide
General Information
14 Owner’s Manual for 60 Hz Air-Cooled Generators
Smart Management Module
(50 and 100 amps)
Smart Management Modules (SMM’s) are used to optimize the performance of a
standby generator. They manage large electrical loads upon startup and shed them
to aid in recovery when overloaded. In many cases, using SMM’s can reduce the
overall size and cost of the system.
Ultrasonic Cleaning Solution 1 gal (3.8 L) of ultra concentrated cleaning solution for metal and plastic surfaces.
Makes 6 gal (22.7 L) of cleaning solution.
All Surface Protectant All surface protectant for vinyl, rubber, and plastics. Creates a barrier to seal and
protect surfaces from water and UV rays while renewing the look of the surface.
Accessory Description