Product Manual
Table Of Contents
- Owner’s Manual 60 Hz Air-Cooled Generators
- Table of Contents
- Section 1: Safety Information
- Section 2: General Information
- Section 3: Operation
- Site Prep Verification
- Generator Enclosure
- Auxiliary Shutdown Switch
- Control Panel Interface
- Using the AUTO/OFF/MANUAL Buttons
- Operating Modes
- Interface Menu Displays
- Menu System Navigation
- Setting the Exercise Timer
- Battery Charger
- Manual Transfer Operation
- Automatic Transfer Operation
- Automatic Sequence of Operation
- Shutting Generator Down While Under Load or During a Utility Outage
- Section 4: Maintenance
- Maintenance
- Preparing for Maintenance
- Performing Scheduled Maintenance
- Service Schedule
- Checking Engine Oil Level
- Changing the Oil and Oil Filter
- Servicing the Air Cleaner
- Spark Plug(s)
- Valve Clearance Adjustment
- Battery Maintenance
- Cleaning the Sediment Trap
- Post Maintenance Checks
- Attention After Submersion
- Corrosion Protection
- Remove From and Return To Service Procedure
- Section 5: Troubleshooting / Quick Reference Guide
General Information
10 Owner’s Manual for 60 Hz Air-Cooled Generators
Data Decals
Two decals on the generator provide information about the unit itself and required fuel inlet pressure for correct opera-
tion.
Model Data Decal
Includes important information about the unit
including:
• model number
• serial number
• production date
• voltage
• frequency
• amps
• country of origin
• rated ambient temperature
The model data decal also displays certifica-
tion symbols by Underwriter’s Laboratory
(UL) and the Southwest Research Institute
(SwRI).
Fuel Inlet Pressure
Displays unit serial number, along with mini-
mum and maximum inlet pressures for natu-
ral gas (NG) and liquid propane (LP) supply.
Space is provided for installer to enter maxi-
mum flow rates based on installed pipe sizes
and lengths.