Product Manual
Table Of Contents
- Owner’s Manual 60 Hz Air-Cooled Generators
- Table of Contents
- Section 1: Safety Information
- Section 2: General Information
- Section 3: Operation
- Site Prep Verification
- Generator Enclosure
- Auxiliary Shutdown Switch
- Control Panel Interface
- Using the AUTO/OFF/MANUAL Buttons
- Operating Modes
- Interface Menu Displays
- Menu System Navigation
- Setting the Exercise Timer
- Battery Charger
- Manual Transfer Operation
- Automatic Transfer Operation
- Automatic Sequence of Operation
- Shutting Generator Down While Under Load or During a Utility Outage
- Section 4: Maintenance
- Maintenance
- Preparing for Maintenance
- Performing Scheduled Maintenance
- Service Schedule
- Checking Engine Oil Level
- Changing the Oil and Oil Filter
- Servicing the Air Cleaner
- Spark Plug(s)
- Valve Clearance Adjustment
- Battery Maintenance
- Cleaning the Sediment Trap
- Post Maintenance Checks
- Attention After Submersion
- Corrosion Protection
- Remove From and Return To Service Procedure
- Section 5: Troubleshooting / Quick Reference Guide
General Information
Owner’s Manual for 60 Hz Air-Cooled Generators 7
Section 2: General Information
Generator Components and Control Locations
Figure 2-1. 10 kW—Components and Control Locations
A Lock with cover F Oil fill cap/dipstick K Oil drain hose O Fuel inlet
B Main line circuit breaker
(generator disconnect)
G Status LED indicators L Composite base P Wi-Fi module
C Control panel H Airbox with air cleaner M Sediment trap Q Data decal location
D Battery compartment
(battery not supplied)
J Oil filter N Fuel regulator R Auxiliary shutdown switch
E Exhaust enclosure
F
001818
M
N
O
P
A
Q
D
C
B
E
L
K
J
H
A
G
R