Product Manual
Table Of Contents
- Section 1: Safety Information
- Section 2: General Information
- Section 3: Operation
- Site Prep Verification
- Generator Enclosure
- Auxiliary Shutdown Switch
- Control Panel Interface
- Using the AUTO/OFF/MANUAL Interface
- Operating Modes
- Interface Menu Displays
- Menu System Navigation
- Setting the Exercise Timer
- Battery Charger
- Manual Transfer Operation
- Automatic Transfer Operation
- Automatic Sequence of Operation
- Shutting Generator Down While Under Load or During a Utility Outage
- Section 4: Maintenance
- Maintenance
- Preparing for Maintenance
- Performing Scheduled Maintenance
- Service Schedule
- Checking Engine Oil Level
- Changing the Oil and Oil Filter
- Servicing the Air Cleaner
- Spark Plug(s)
- Valve Clearance Adjustment
- Battery Maintenance
- Cleaning the Sediment Trap
- Post Maintenance Checks
- Attention After Submersion
- Corrosion Protection
- Remove From and Return To Service Procedure
- Section 5: Troubleshooting / Quick Reference Guide
General Information
Owner’s Manual for 60 Hz Air-Cooled Generators 9
Figure 2-3. 20 kW–22 kW—Components and Control Locations
A. Lock with cover F. Exhaust enclosure L. Composite base Q. Wi-Fi module
B. Main line circuit breaker
(generator disconnect)
G. Status LED indicators M. Oil dipstick R. Data decal location
C. Airbox with air cleaner H. Oil drain N. Sediment trap S. Auxiliary shutdown switch
D. Control panel J. Oil fill cap O. Fuel regulator T. Auxiliary shutdown switch
E. Battery compartment
(battery not supplied)
K. Oil filter P. Fuel inlet
001786
N
M
O
P
Q
G
K
J
F
L
R
E
A
D
C
B
A
H
T
S