Spec Sheet

5 of 5
®
Generac Power Systems, Inc. • S45 W29290 HWY. 59, Waukesha, WI 53189 • generac.com
©2016 Generac Power Systems, Inc. All rights reserved. All specifications are subject to change without notice. Bulletin 10000000194-B 05/18/16
Model # Product Description
G006463-3 Moblie Link™
Generac's Mobile Link allows you to check the status of your generator from anywhere that you have
access to an Internet connection from a PC or any smart device. You will even be notified via e-mail
or text message when a change in the generator's status occurs. Available in the U.S. only.
G005819-0 26R Wet Cell Battery
Every standby generator requires a battery to start the system. Generac offers the recommended 26R
wet cell battery for use with all air-cooled standby product (excluding PowerPact®).
G007101-0 Battery Pad Warmer
The pad warmer rests under the battery. Recommended for use if the temperature regularly falls
below 0°F. (Not necessary for use with AGM-style batteries).
G007102-0 Oil Warmer
Oil warmer slips directly over the oil filter. Recommended for use if the temperature regularly
falls below 0°F.
G007103-0 Breather Warmer
The breather warmer is for use in extreme cold weather applications. For use with Evolution
controllers only in climates where heavy icing occurs.
G005621-0
Auxiliary Transfer Switch Contact
Kit
The auxiliary transfer switch contact kit allows the transfer switch to lock out a single large electrical
load you may not need. Not compatible with 50 amp pre-wired switches.
G007027-0 - Bisque
Fascia Base Wrap Kit
(Standard on 22 kW)
The fascia base wrap snaps together around the bottom of the new air cooled generators. This offers
a sleek, contoured appearance as well as offering protection from rodents and insects by covering the
lifting holes located in the base.
G005703-0 - Bisque Paint Kit
If the generator enclosure is scratched or damaged, it is important to touch-up the paint to protect
from future corrosion. The paint kit includes the necessary paint to properly maintain or touch-up a
generator enclosure.
G006485-0 - 16, 20 &
22 kW
Scheduled Maintenance Kit
Generac's scheduled maintenance kits provide all the hardware necessary to perform complete
routine maintenance on a Generac automatic standby generator.
G006873-0
Smart Management Module
(50 Amps)
Smart Management Modules are used in conjunction with the Automatic Transfer Switch to
increase its power management capabilities. It provides additional power management flexibility
not found in any other power management system.
16/20/22 kW available accessories
dimensions & UPCs
®
16/20/22 kW
Dimensions shown are approximate. Refer to installation manual for exact dimensions. DO NOT USE THESE DIMENSIONS FOR INSTALLATION PURPOSES.
Model UPC
G007035-0 696471070354
G007036-0 696471070361
G007037-0 696471070378
G007038-0 696471070385
G007039-0 696471070392
G007040-0 696471070408
G007042-0 696471070422
G007043-0 696471070439
648 mm
[25.5 in]
727.2 mm
[28.6 in]
637.6 mm
[25.1 in]
1232 mm
[48.5 in ]
1218 mm
[48.0 in]
LEFT SIDE VIEW
FRONT VIEW