Install Manual

Control Panel Start-Up/Testing
30 Installation Guidelines For 60 Hz Air-Cooled Generators
Table 7-1. Activation Chart
Display Reads Troubleshooting
Use arrow keys to
scroll to desired
language.
Press ENTER to
select.
Language can be changed later using
the EDIT menu.
Press ENTER to begin
the activation process.
If ESCAPE is pressed instead of
ENTER, the generator will only run in
manual mode (for test purposes) and
NOT ACTIVATED will be displayed.
You will need to remove the 7.5 amp
generator control panel fuse AND
disconnect the T1, N1, and N2
connector in the external connection
box (if equipped); or disconnect utility
input (main breaker) to the transfer
switch for 3–5 seconds and reconnect,
then begin with Step 1.
If you do not have your
activation code, go to
www.activategen.com
or call 1-888-
9ACTIVATE
(922-8482 US & CA
only).
If you already have
your activation code,
wait 3–5 seconds for
the next display.
Use arrow keys to
scroll and find the first
number of your
Activation Code.
Press ENTER to
select.
Repeat this step until
all digits have been
entered.
Use ESCAPE to
correct previous digits.
Language
- English +
002227
Activate me (ENT) or
ESC to run in manual
002228
To Activate go to
www.activategen.com
002229
Serial 123456789
Passcode XXXXX +/-
002230