Spec Sheet

5 of 5
®
Generac Power Systems, Inc. • S45 W29290 HWY. 59, Waukesha, WI 53189 • generac.com
©2015 Generac Power Systems, Inc. All rights reserved. All specifications are subject to change without notice. Bulletin 0K8458-G Printed in U.S.A. 08/03/15
Model # Product Description
006463-3 Mobile Link™
Generac's Mobile Link allows you to check the status of your generator from anywhere that you have
access to an Internet connection from a PC or with any smart device. You will even be notified when a
change in the generator’s status occurs via e-mail or text message. Available in the U.S. only.
005819-0 26R Wet Cell Battery
Every standby generator requires a battery to start the system. Generac offers the recommended 26R
wet cell battery for use with all air-cooled standby product (excluding PowerPact®).
006212-0 Cold Weather Kit
If the temperature regularly falls below 32 °F (0 °C), a cold weather kit is required to maintain optimal
battery and oil temperatures. Kit consists of a battery warmer and oil filter heater with built-in
thermostats.
005621-0
Auxiliary Transfer Switch Contact
Kit
The auxiliary transfer switch contact kit allows the transfer switch to lock out a single large electrical
load you may not need. Not compatible with 50 amp pre-wired switches.
005839-0 - Bisque
005666-0 - Gray
Fascia Base Wrap Kit*
(Standard on 22 kW)
The fascia base wrap snaps together around the bottom of the new air cooled generators. This offers
a sleek, contoured appearance as well as offering protection from rodents and insects by covering the
lifting holes located in the base.
005703-0 - Bisque
005704-0 - Gray
Paint Kit*
If the generator enclosure is scratched or damaged, it is important to touch-up the paint to protect
from future corrosion. The paint kit includes the necessary paint to properly maintain or touch-up a
generator enclosure.
006484-0 - 16 kW
006485-0 - 20 & 22 kW
Scheduled Maintenance Kit
Generac's scheduled maintenance kits provide all the hardware necessary to perform complete
routine maintenance on a Generac automatic standby generator.
006664-0 Wireless Remote Monitor
Completely wireless and battery powered, Generac's wireless remote monitor provides you with
instant status information without ever leaving the house. Not compatible with CorePower or EcoGen
systems.
006873-0
Smart Management Module
(50 Amps)
Smart Management Modules are used in conjunction with the Automatic Transfer Switch to
increase its power management capabilities. It provides additional power management flexibility
not found in any other power management system.
* Note: Bisque kits are used in conjunction with steel enclosures. Gray kits are used in conjunction with aluminum enclosures.
16/20/22 kW available accessories
dimensions & UPCs
®
16/20/22 kW
Dimensions shown are approximate. Refer to installation manual for exact dimensions. DO NOT USE THESE DIMENSIONS FOR INSTALLATION PURPOSES.
731.9 mm
[28.8 in]
637.6 mm
[25.1 in]
LEFT SIDE VIEW
642 mm
[25.3 in]
1218 mm
[47.9 in]
FRONT VIEW
1226 mm
[48.3 in]
Model UPC
006459-2 696471064599
006461-1 696471064612
006721-1 696471067217
006729-2 696471067293
006730-1 696471067309
006551-2 696471065510
006552-1 696471065527
006462-2 696471064629