Spec Sheet
1 of 5
¡ INNOVATIVE DESIGN & PROTOTYPE TESTING are key components
of GENERAC’S success in “IMPROVING POWER BY DESIGN.” But it
doesn’t stop there. Total commitment to component testing, reliability
testing, environmental testing, destruction and life testing, plus testing
to applicable CSA, NEMA, EGSA, and other standards, allows you to
choose GENERAC POWER SYSTEMS with the confidence that these
systems will provide superior performance.
¡
TRUE POWER™ ELECTRICAL TECHNOLOGY: Superior harmonics
and sine wave form produce less than 5% Total Harmonic Distortion for
utility quality power. This allows confident operation of sensitive electronic
equipment and micro-chip based appliances, such as variable speed HVAC
systems.
¡ TEST CRITERIA:
PROTOTYPE TESTED NEMA MG1-22 EVALUATION
SYSTEM TORSIONAL TESTED MOTOR STARTING ABILITY
¡ SOLID-STATE, FREQUENCY COMPENSATED VOLTAGE REGULATION.
This state-of-the-art power maximizing regulation system is standard on
all Generac models. It provides optimized FAST RESPONSE to changing
load conditions and MAXIMUM MOTOR STARTING CAPABILITY by
electronically torque-matching the surge loads to the engine. Digital
voltage regulation at ±1%.
¡ SINGLE SOURCE SERVICE RESPONSE from Generac’s extensive dealer
network provides parts and service know-how for the entire unit, from the
engine to the smallest electronic component.
¡ GENERAC TRANSFER SWITCHES. Long life and reliability are
synonymous with GENERAC POWER SYSTEMS. One reason for this
confidence is that the GENERAC product line includes its own transfer
systems and controls for total system compatibility.
INCLUDES:
• True Power™ Electrical Technology
• Two Line LCD Multilingual Digital
Evolution™ Controller (English/Spanish/
French /Portuguese)
• Two Transfer Switch Options Available:
50 Amp Pre-Wired Switch or
200 Amp Smart Switch.
See Page 4 for Details.
• Electronic Governor
• External Main Circuit Breaker,
System Status & Maintenance
Interval LED Indicators
• Sound Attenuated Enclosure
• Flexible Fuel Line Connector
• Composite Mounting Pad
• Natural Gas or LP Gas Operation
• 5 Year Limited Warranty
• Capability to be installed within 18" of a building*
Standby Power Rating
Models 006237-0, 006245-0 (Steel - Bisque) - 8 kW 60Hz
Models 006437-0, 006438-0, 006439-0 (Steel - Bisque) - 11 kW 60Hz
FEATURES
GUARDIAN
®
SERIES
Residential Standby Generators
Air-Cooled Gas Engine
8/11kW
®
8/11kW
Note: CUL certification only applies to unbundled units and units packaged with pre-wired switches.
Units packaged with the Smart Switch are UL certified in the USA only.
*Only if located away from doors, windows and fresh air intakes, and unless otherwise directed by local codes.





