Product Manual

Section 3 Operation
Automatic Standby Generator Owner’s Manual 11
3.1  Control Panel Interface
The control panel on this unit is intended to only be operated by qualified service personnel.
The Control panel interface is located under the lid of the enclosure. Before attempting to lift the lid of the enclosure, verify that both left and right
side locks are unlocked. To remove the front cover, lift the cover straight up to disengage the side hooks, then tilt and lift it away from the unit.
When closing the unit, ensure that both left and right side locks are securely locked. See Figure 3-1.
.
The enclosed keys provided with this unit are for service personnel usage only.
Figure 3-1: Generator With Lid Open/Side Lock Location
Set to AUTO, the crank and at any time Such
when power below a level or the
cycle. that might be by such set to OFF and
the ing on or around the or Then, place a DO
NOT
tag on the panel and on the fer
NOTE: The generator is to be run with all appropriate panels in place, including during troubleshooting by a technician.
7-()03'/