Install Manual
Table Of Contents
- Installation Guidelines
- FREQUENTLY ASKED QUESTIONS
 - Table of Contents
 - Section 1 Safety and General Information
 - Section 2 Unpacking and Inspection
 - Section 3 Site Selection and Preparation
 - Section 4 Generator Placement
 - Section 5 Fuel Conversion/Gas Connections
 - Section 6 Electrical Connections
 - Section 7 Control Panel
 - Section 8 Troubleshooting
 - Section 9 Quick Reference Guide
 - Section 10 Accessories
 - Section 11 Diagrams
 - Part No. 0K5804
 
 
Quick Reference Guide
44 Installation Guidelines for Air-Cooled Generators
Unit will not start in 
AUTO with utility loss.
RED Check the LED’s / 
Screen for alarms.
UNDERSPEED Contact servicing dealer.
Unit will not start in 
AUTO with utility loss.
RED Check the LED’s / 
Screen for alarms.
STEPPER 
OVERCURRENT
Contact servicing dealer.
Unit will not start in 
AUTO with utility loss.
RED Check the LED’s / 
Screen for alarms.
MISWIRE Contact servicing dealer.
Unit will not start in 
AUTO with utility loss.
RED Check the LED’s / 
Screen for alarms.
OVERVOLTAGE Contact servicing dealer.
Yellow LED illuminated in 
any state.
YELLOW Check the screen for 
additional information.
LOW BATTERY Clear alarm. Check the battery using the 
control panel under the MAIN menu using 
the BATTERY MENU option. If it states 
battery is GOOD contact servicing dealer. 
If it states CHECK BATTERY replace the 
battery.
Yellow LED illuminated in 
any state.
YELLOW Check the screen for 
additional information.
BATTERY
 PROBLEM
Contact servicing dealer.
Yellow LED illuminated in 
any state.
YELLOW Check the screen for 
additional information.
CHARGER 
WARNING
Contact servicing dealer
Yellow LED illuminated in 
any state.
YELLOW Check the screen for 
additional information.
SERVICE A Perform SERVICE A maintenance, hit 
ENTER to clear.
Yellow LED illuminated in 
any state.
YELLOW Check the screen for 
additional information.
SERVICE B Perform SERVICE B maintenance, hit 
ENTER to clear.
Yellow LED illuminated in 
any state.
YELLOW Check the screen for 
additional information.
Inspect Battery Inspect Battery, hit ENTER to clear.
Table 9-1. System Diagnosis (Continued)
Problem LED Things to Check Active Alarm Solution










