User Manual

Unlock the Safety Lock

IV. Getting started

1. Ensure the magnetic charging interface and the adapter charging interface are dry and

clean, and no foreign materials attached. Ensure no water among the charging interfaces.

2. The LED light on adaptor is red when charging, Logo light will turn off after 30 seconds

breathing; The light on adaptor is green when battery is fully charged, in approximately

1.5-2 hours.

3. Please charge in a dry and ventilated environment.

IV.1 Start S2

IV.2 Shift gears manually

IV.3 Battery charge

Press both buttons to start；

Grab tight underwater

How to- Keep pressing the power button (left hand) and press the motor

button (right hand) twice to shift gears manually between low and high speed.

The shift gears manually is invalid under parental mode

Single-hand control is invalid under parental mode. Must press both hands to start.

When in parental mode, the LOGO light/speed indicator would be staying on.