Geneinno S2 Waterscooter (FCC ID: 2ANXGS2) User Manual V1.0.1 2020.02 Shenzhen Geneinno Technology Co., Ltd www.geneinno.
Disclaimer Please read the following statement carefully before using Geneinno S2 product. The start use of this product shall be deemed as acceptance of the entire contents of the statements below. 1. The company shall not be liable for the after-sale return and replacement of the product for any damage or failure caused by forced disassembly or non-machine operational malfunction, nor the maintenance, parts replacement and transportation expenses incurred. 2.
I. Introduction Geneinno S2 is a premium, portable water scooter with dual engine configuration. The stylish neat design of laptop size, results in lightweight of only 2.7kg. Geneinno S2 allows you to navigate freely underwater at a speed of 4.32km/h with high-efficiency dual motors. It could be connected via wireless connection to the smart APP, to share your footage on the mobile phone.
II. User tips Warnings： This is NOT a life saving device. DO NOT use it as buoyancy aid. Please follow the age recommendation: this product is for 12 year old and above; teenagers between 12 and 18 are required to operate under adult surveillance. Read the User Manual carefully before use. Use of this product to assist diving activities must be licensed and accompanied. Crushing / Cutting Hazard. Take particular care of long hair near motor when using the product.
II. User tips Cautions： l Please rinse the product with fresh water after use, and turn on selfcleaning mode to prevent crystallization; please place the machine in a dry and cool environment after cleaning. l DO NOT use the product below the maximum depth of 100ft. l D not remove motor cover in water; If the propeller is found intermittent, or a buzz is heard, remove the motor cover and check/clean the propeller and motor at a safe place on shore while the safety lock is locked.
III. Product Description Geneinno S2 1. LOGO light / speed indicator: white-low; blue-high 2. Wireless LED indicator: stayed on when connected / flashing when standby 3. Motor button 4. Thrusters 5. Battery indicator: in normal battery power is white; in low battery is red and flashing 6. Power button 7. Underwater motors 8. Motor front cover（Please follow the arrow direction to install/remove） 9. Propellers 10. GoPro mount 11. Magnetic charging interface 12. Safety lock 13. Optional device connection 14.
IV. Getting started IV.1 Start S2 Unlock the Safety Lock Press both buttons to start； Grab tight underwater Single-hand control is invalid under parental mode. Must press both hands to start. When in parental mode, the LOGO light/speed indicator would be staying on. IV.2 Shift gears manually How to- Keep pressing the power button (left hand) and press the motor button (right hand) twice to shift gears manually between low and high speed. The shift gears manually is invalid under parental mode IV.
IV. Getting started IV.4 S2 device status briefing S2 device has four status: working, standby, charging and hibernate. Working: the device is in normal work，including motor start, wireless connection, and etc, in following situations： 1. Logo light/speed indicator is on: Low - white, High - blue. 2. The wireless indicator stays on when connected; it flashes when device is working but not in wireless connection. 3. Battery indicator is white in normal power, it is red and flashing when in low battery power.
V. Wireless connection and APP 1. Press the power button to activate S2 (Wireless indicator flashes). 2. Turn on all wireless settings on your phone, and open Geneinno APP. 3. Select S2 device control page from the main interface. 4. Click ‘device not connected’ button. 5. Wait for device search results display. 6. Device name format:‘Geneinno_****’. 7. Click the device name to connect. 8. After connection success, please click "device connected" button to enter the device control page.
V. Wireless connection and APP Menu bar： • History records: keep the last ten records. Each record could be edited & shared. • Firmware: device firmware version, prompt update if not the latest version (synchronous prompt in status bar). • Device information: the device model and corresponding MAC code. • Restore factory settings: restore all settings to default. • Help: instructions for starters. When disconnected, APP will automatically log out of the device control page. VI.
VII. Camera assembly Mount your motion cameras on S2. Currently supports GoPro HERO [3, 3+, 4, 5, 6, 7, 8], and other motion cameras with the same connector. Installation：1. Prepare hand turning screw + waterproof cover; 2. Put your motion camera in waterproof cover; 3. Attach the connector of waterproof cover to S2 GoPro mount, fasten and lock them by hand screws.
Waterscooter S2 Weight Power 5.9 lbs Dimension 19*10*6 inch Max. Depth 100ft Temperature Battery Gear speed Total power 32~104℉ Low gear-45min；High gear- duration Safety lock Total thrust 20min 22 lbs Low gear-180W；High gear-350W Battery Type Safety lock / Remote parental Rechargeable Li-ion polymer battery mode Capacity 97.68Wh / 4400mAh Low gear- 2.0 mph；High gear- Voltage 22.2V 2.7 mph External device GoPro, lights, balance weight, support buoyancy materials, and etc.
FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
