User Manual

Twin Sun 1 × 2 Bi-Color Soft LED Panel - USER MANUAL
10
USING DMX
The Twin Sun supports DMX-512 so the
light’s settings can be remotely controlled
from a DMX lighting control console.
Important
Do not use a 3-pin XLR microphone
cable to connect DMX devices. Use only
cables that are made specifically for
DMX devices. Substituting a microphone
cable can cause data transmission
problems in your DMX setup.
To setup DMX operation, follow these steps:
1. Use a 3-pin XLR cable to connect
a DMX controller to the Twin
Sun DMX input connector.
2. Use the Twin Sun’s DMX output
connector to daisy-chain multiple lights.
3. Press the dimmer dial to
activate DMX mode.
4. Turn the dial select a DMX address.
Make sure the DMX address on the
Twin Sun matches the DMX console.
Press the dimmer dial again to return
to brightness control mode.
instructions