User Manual

Torpedo Portable Focusing LED - USER MANUAL
7
INSTRUCTOONS
POWERING THE TORPEDO
AND ADJUSTING THE
BRIGHTNESS
Battery Power
The Torpedo will operate with two different
types of batteries.
Sony NP-F Series Batteries: Align the battery
terminals, and slide the NP-F battery into the
battery slot until it locks into place (Figure A).
Professional Batteries: Use the included D-tap
cable to connect the battery's D-tap port to the
Torpedo’s power input (Figure B).
Press the on button. The light powers on to
the previous brightness setting.
AC Power
Important: The Torpedo is a multivoltage
fixture capable of running on 120 to 240 V,
50/60 Hz. The included cable has a 120 V, 50
Hz (North American) plug. To use this fixture
with other voltages, you must use a plug
adapter (sold separately).
Attach the power adapter cord to the power
input socket.
Make sure the unit is turned off. Insert the
mini XLR connector from the AC power
adapter into the Torpedo’s power input.
The 3-pin mini XLR connector
should fit easily into the Torpedo’s
power input. Using force to insert
the connector can damage the pins.
Make sure the pins are aligned, and
reinsert the connector until it clicks
into place.
A B
Note