User Manual

ManualsBrandsGenaray ManualsContinuous LightingTorpedo Bi-Color LED 3-Light Kit with Case

1

2

3

4

5

6

7

8

9

Torpedo Portable Focusing LED - USER MANUAL

6

MOUNTING ON A

LIGHT STAND

1. Loosen the yoke’s locking screw, and ﬁt

the receiver over the light stand’s 5/8-inch

stud. Tighten the locking screw until

secure.

2. Loosen the tilt angle screws, and adjust

the tilt angle of the light. Tighten the

screws until secure.

ATTACHING THE

BARNDOORS

Align the barndoors with the front of the

Torpedo, and screw them on until

they’re secure.

The barndoor ﬁxture should easily

screw onto the light. Don’t use force

if it seems hard to turn, because you

can damage the threads. Unscrew

the barndoors, and then realign

them and screw them in again.

If you remove the lens for any reason, you can

replace it by ﬁtting it into the Torpedo with the

textured side facing in toward the LED.

1 2

Note

INSTRUCTIONS