User's Manual

Trailblazer Portable LED Monolight - USER MANUAL
8
MOUNTING ON A LIGHT STAND
Important!
Always support the Trailblazer with one
hand when mounting or adjusting the
angle until all locks and connections are
tight and secure.
The Trailblazer can be mounted directly to
a light stand that has a 5/8-inch receiver.
USING THE TILT ADAPTER
Before mounting the Trailblazer to a light
stand with the tilt adapter, make sure
the tilt lock is completely tightened.
1. Loosen the locking knobs.
2. Place the tilt adapter onto a
light stand, and tighten the
locking knob until secure.
3. Place the Trailblazer’s baby pin into
the tilt adapter’s receiver, and tighten
the locking knob until secure.
4. To adjust the angle of the light, loosen the
tilt lock while supporting the light with
one hand. Adjust the light’s angle, and
retighten until secure.
ATTACHING AN UMBRELLA
The tilt adapter has an integrated
umbrella mount. To attach an
umbrella, follow these steps:
1. Loosen the umbrella lock, and insert the
umbrella shaft through the tilt adapter.
2. Adjust the umbrella’s distance from the
light, and retighten the umbrella lock.
PREPARING FOR USE
instructions