T40-D TRAILBLAZER PORTABLE 40 W DAYLIGHT LED MONOLIGHT USER MANUAL
THANK YOU FOR CHOOSING GENARAY Trailblazer INTRODUCTION Genaray’s compact and portable Trailblazer features a COB LED array that offers bright, flicker-free light that’s perfect for photo and video shoots in the studio or on location. The fixture runs on a readily available NP-F battery or on AC power, and despite its size, it serves up 8010 lux to illuminate your subjects with an extremely high degree of color accuracy.
PRECAUTIONS Recycling Lithium-Ion Batteries Lithium-ion batteries are recyclable. You can help preserve the environment by returning your used rechargeable batteries to a collection and recycling location near you. · Please read and follow these instructions, and keep this manual in a safe place. · Make sure the unit is powered off when plugging it into a power source. · Use only the correct, recommended voltage. · Handle the unit with care.
LCD Screen Brightness indicator graphic OVERVIEW Battery status Remaining battery percentage Brightness indicator 4 Trailblazer Portable LED Monolight - USER MANUAL
Bowens mount Brightness Knob Product Overview Power Knob DC power input Battery release Diffuser lens Battery slot and contacts 5/8 in.
Tilt Adapter Power and Cables Top receiver Locking knobs AC adapter Umbrella lock Product Overview Umbrella mount AC power cord Tilt lock Bottom receiver Carry case Battery charger and plate 6 Trailblazer Portable LED Monolight - USER MANUAL NP-F970 battery
INSTALLING THE BATTERY The Trailblazer includes a charger for the rechargeable NP-F battery. Slide the battery into the battery slot until it locks in place. 1. To remove the battery, press the battery release and slide the battery out of the slot. Slide the battery onto the battery plate, and attach the battery plate to the charger by sliding the plate into the charger. 2. Swivel the plug out of the notch, and plug the charger into an available AC outlet.
PREPARING FOR USE Instructions MOUNTING ON A LIGHT STAND 3. Important! Always support the Trailblazer with one hand when mounting or adjusting the angle until all locks and connections are tight and secure. Place the Trailblazer’s baby pin into the tilt adapter’s receiver, and tighten the locking knob until secure. 4. To adjust the angle of the light, loosen the tilt lock while supporting the light with one hand. Adjust the light’s angle, and retighten until secure.
ATTACHING A REFLECTOR OR LIGHT-SHAPING ACCESSORY USING THE TRAILBLAZER WITH BATTERY POWER The Trailblazer features an integrated Bowens mount that accommodates most Bowens-compatible accessories such as reflectors, softboxes, grids, and snoots. 1. Make sure the power knob is in the off position the barrel connector from the DC input if it's plugged in. 2. Install the battery (see Installing the Battery above). 3. Turn on the Trailblazer. To attach a Bowens-mount accessory: 1. 2.
Instructions SETTING THE BRIGHTNESS PRODUCT SPECIFICATIONS Use the brightness knob to adjust the brightness from 100% to 5% in 1% increments. Light Fixture LED Chip Type: COB LED Output Power: 40 W Beam Angle: 40° Color Temperature: 5600 K Color Accuracy Standard: C RI: 97.1 TLCI: 99 Cooling System: Fan Dimming: Yes (100% to 5% in 1% increments) Display: LCD Housing Material: ABS plastic Light Intensity @ 3 ft.: 8010 lx Expected Lamp Life: 50,000 hr.
PRODUCT SPECIFICATIONS (CONT.) Dimensions: Length: 6.25 in. (15.9 cm) Diameter:5 in. (12.7 cm) Power Weight: 1.3 lb. (0.6 kg) without battery DC Input Power: 7.4 V Connectors Power Source: AC adapter, NP-F battery Battery Plate: Integrated NP-F battery plate Max Power Consumption: 40 W Power Input Connector: Barrel Run Time: Approx 60 min. @ max power with included NP-F970 battery Mounting Power Pass-Thru: None Reflector Mount: Bowens S-type Fixture Mount: 5/8 in.
ONE-YEAR LIMITED WARRANTY This Genaray product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later.
