SSL-RC Wireless Remote FOR DIGITAL SSL SERIES LEDS USER MANUAL
THANK YOU FOR CHOOSING GENARAY INTRODUCTION 2 The Genaray SSL-RC 2.4 GHz Wireless Remote is a dedicated remote for Genaray’s Digital SSL Series LEDs. The 4-channel remote controls dimming on all models, and it adjusts color temperature on bi-color models from over 100 feet away. The stepped dial controls the brightness in 1% increments, and the color temperature in 50 K increments.
· Please read and follow these instructions, and keep this manual in a safe place. · Keep this unit away from water and any flammable gases or liquids. · Do not attempt to disassemble or repair this product—doing so will void the warranty, and Genaray will not be responsible for any damage. Precautions PRECAUTIONS · Install the battery in the proper orientation. Installing batteries in the reverse orientation can cause them to leak, overheat, or explode. · Remove the battery when storing the remote.
LCD screen PRODUCT OVERVIEW Battery compartment Adjustment dial Power button 4 Wireless Remote for Digital SSL Series LEDs - USER MANUAL Battery cover
MODE SELECTION 1. Remove the battery case cover, and install one AA battery. Make sure it’s in the proper orientation. Then replace the battery case cover. Repeatedly pressing the adjustment dial selects the three operating modes. 2. Before using the transmitter, make sure your Genaray Digital SSL LED lights are turned on. ·· Power output adjustment mode: The dimming icon (DIM:) blinks. 3. To turn on the transmitter, press the transmitter’s power button. The LCD screen will illuminate.
Instructions SETTING THE CHANNEL Turn the adjustment dial to select the channel (A–D). After five seconds, the screen will return to the function page. The "OFF" selection prevents you from changing the settings inadvertently. To set the light’s channel, refer to the user manual that came with the light. ADJUSTING THE COLOR TEMPERATURE Use the transmitter to wirelessly adjust the color temperature of one 6 or more Bi-Color SSL LEDs from 3000–5600 K in 50 K increments.
Press the power button to turn off the remote. If the SSL LEDs are still on, they will remain at the last values that were set on the remote. Their color temperatures and brightness settings can still be adjusted via their control boxes. SPECIFICATIONS Channels: 4 Functions Supported: D imming, color temperature (bi-color LEDs) Frequency: 2.4 GHz Frequency Range: 100 ft. (30.5 m) Power: AA Battery (×1) Dimensions: 4 × 2.6 × 1 in. (10.2 × 6.5 × 2.5 cm) Weight: 3 oz.
ONE-YEAR LIMITED WARRANTY This Genaray product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later.
