User's Manual

9
SSL-836B 8 × 36 in. Soft Strip Bi-color LED - USER MANUAL
INSTRUCTOONS
POWERING THE SSL-836B
(CONTINUED)
ADJUSTING THE
LIGHT
Brightness
The brightness control on the control box can
adjust the output from 0% to 100% in. 1%
increments.
Tap the up and down buttons to adjust the
brightness in 1% increments. Touch and hold
the buttons to rapidly adjust.
Color Temperature
The SSL-836B has a color temperature range
of 3000 to 5600 K. Tap the color temperature
up and down buttons to change the color
temperature in 50 K increments. Touch and
hold the buttons to rapidly adjust.
Using the SSL-836B with Battery Power
Important!
Make sure to use batteries
rated for 120 W or greater.
1. When attaching a V-mount battery,
make sure the power switch is in
the off position, and disconnect the
AC adapter so the control box is not
plugged into a wall outlet.
2. Align the battery terminals with the
contacts in the battery mount.
3. Place the battery into the mount, and
push the battery toward the contacts
until it clicks into place.
4. Push the 3-way power switch to the DC
position.
To connect gold-mount batteries to the control
box, use a D-tap power cable (not included).