User's Manual

7
SSL-836B 8 × 36 in. Soft Strip Bi-color LED - USER MANUAL
INSTRUCTOONS
Attaching the Lollipop Mount
(continued)
To remove the lollipop mount, press up on
the release button, turn the lollipop mount a
quarter turn counterclockwise, and lift it off
the mounting plate.
Mounting the SSL-836B to a Light Stand
1. Make sure the ratchet handle is tightened
before mounting the SSL-836B.
2. Loosen the locking knob, and place the
5/8-inch receiver on a light stand.
3. Tighten the locking knob until secure.
4. Loosen the ratchet handle to adjust the
light’s tilt and swivel. Once the light is aimed,
retighten the ratchet handle, and make sure
the fixture is secure.
Pro Tip: To prevent the light stand from tipping
over, place a counterweight like a sandbag over
one or two legs of your light stand.
43