User's Manual

SSL-50B 50 in. Bi-color Soft Strip LED - USER MANUAL
9
2. Align the battery terminals with the
contacts in the battery mount.
3. Place the battery down into the mount,
and push the battery toward the
contacts until it clicks into place.
4. Set the power switch to DC.
To connect a Gold Mount battery
to the control box, use a D-tap
power cable (not included).
USING THE SSL-50B
WITH BATTERY POWER
Note:
Make sure to use batteries
rated for 120 W or greater.
1. When attaching a V-mount battery,
make sure the power switch is in
the off position, and disconnect the
AC adapter so the control box is
not plugged into a wall outlet.
instructions
2