User Manual

SSL-50 50 in. Soft Strip LED - USER MANUAL
10
ADJUSTING
THE LIGHT
WIRELESS
OPERATION
The brightness control buttons
on the control box can adjust the
output from 0% to 100%.
Touch the up/down buttons to adjust
the brightness in 1% increments, or
touch and hold to adjust rapidly.
Adjust the barndoor flaps to aim or
shape the beam and contain light spill.
The SSL-50’s control box has an
integrated transmitter and receiver.
The Genaray SSL-RC remote (sold
separately) can control multiple SSL-50
lights. Refer to the SSL-RC user manual
for setup and operation instructions.
You can also control multiple lights
from the control box of the SSL-50.
First screw the antenna into the
antenna port on each control box.
Mutual Control
(multiple lights set to the same channel)
· Any control box will set the
brightness level for all the lights.
Individual Control
(multiple lights set to different channels)
· Use the channel selector buttons on
one control box to adjust the brightness
of lights set to each channel.
instructions