SSL-50 50 IN.
THANK YOU FOR CHOOSING GENARAY SSL-50 INTRODUCTION 2 The Genaray SSL-50 is a daylight-balance strip LED that provides continuous, even illumination along its entire 50-inch length. In the studio, it’s perfect for lighting fulllength portraits, headshots, and product photography. It also excels as a background or accent light and is perfect as a hair light for individuals or group shots.
· Please read and follow these instructions, and keep this manual in a safe place. · Handle the unit with care. · Keep this unit away from water and any flammable gases or liquids. · Clean the unit with only a soft, dry cloth. · Make sure the unit is powered off when plugging it into a power source. · Keep this unit away from children. · Use only the correct, recommended voltage.
Ratchet handle 5/8 in. baby receiver Lollipop Locking knob Release lever PRODUCT OVERVIEW Mounting studs V-mount adapter with touch-connect strap Front Back Diffuser 4 SSL-50 50 in.
Battery power indicator Dimmer control box Product Overview Channel selector Brightness up/down controls Battery contacts Battery release button V-mount battery slot Hanger loop Power output cable 3-way power switch D-tap power socket Antenna port 4-pin XLR input SSL-50 50 in.
MOUNTING THE SSL-50 CONTENTS INCLUDE · Light fixture ATTACHING THE LOLLIPOP MOUNT · Dimmer control box with V-mount 1. Close the barndoors, and place the light facedown on a flat surface. Instructions · Power supply · Lollipop mount · Power cable · V-mount strap · Antenna · Carry case with shoulder strap 2. Align the lollipop mount with the mounting plate, and insert the studs into the mounting plate holes. 3.
POWERING THE SSL-50 1. Make sure the ratchet handle is tightened before mounting the SSL-50. 2. Loosen the locking knob, and place the 5/8-inch receiver on a light stand. 3. Tighten the locking knob until secure. 4. Loosen the ratchet handle to adjust the light’s tilt and swivel. Once the light is aimed, retighten the ratchet handle, and make sure the fixture is secure. 3 4 USING THE SSL-50 WITH AC POWER Important The SSL-50 is a multivoltage fixture capable of running on 100 to 240 V, 50/60 Hz.
Instructions 2. To connect the power output cable to the SSL-50’s 4-pin connector, align the two connectors, and press them together. Then tighten the locking collar until secure. TO MOVE THE AC ADAPTER SAFELY OUT OF THE WAY Important! The connectors should easily attach. Don’t use force to join them together. Hold one connector still and rotate the other while gently pushing them together until it seats in place, then tighten the collar. 2.
2. Align the battery terminals with the contacts in the battery mount. Note: Make sure to use batteries rated for 120 W or greater. 3. Place the battery down into the mount, and push the battery toward the contacts until it clicks into place. 1. When attaching a V-mount battery, make sure the power switch is in the off position, and disconnect the AC adapter so the control box is not plugged into a wall outlet. To connect a Gold Mount battery to the control box, use a D-tap power cable (not included).
ADJUSTING THE LIGHT Instructions The brightness control buttons on the control box can adjust the output from 0% to 100%. WIRELESS OPERATION The SSL-50’s control box has an integrated transmitter and receiver. Touch the up/down buttons to adjust the brightness in 1% increments, or touch and hold to adjust rapidly. The Genaray SSL-RC remote (sold separately) can control multiple SSL-50 lights. Refer to the SSL-RC user manual for setup and operation instructions.
PRODUCT SPECIFICATIONS Color Temperature: 5600 K Dimming: 1% to 100% Luminance: 1693.6 @ 3 ft., 1415.9 @ 1 m Coverage: 75° CRI: 96 TLCI: 98.3 Electrical Consumption: 80 W AC Operating Voltage: 100 to 240 V, 50/60 Hz DC Operating Voltage: 15 V, 5 A Power Cord Length: AC cord: 114 in. (2.9 m) AC adapter cord: 44 in. (111.8 cm) Adapter DC cord: 37.5 in. (95.2 cm) DC cord: 43 in. (109.2 cm) Specifications LED Count: 400 Weight : Light: 8.5 lb. (3.9 kg) Control box: 1.9 lb. (862 g) AC adapter: 0.9 lb.
ONE-YEAR LIMITED WARRANTY This Genaray product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later.
