User Manual

9
SSL-36B 36 in. Soft Strip Bi-color LED - USER MANUAL
INSTRUCTOONS
POWERING THE SSL-36B
(CONTINUED)
ADJUSTING THE
LIGHT
Brightness
The brightness control on the control box
can adjust the output from 1% to 100% In 1%
increments. Tap the up and down buttons to
adjust the brightness in 1% increments. Touch
and hold the buttons to rapidly adjust.
Color Temperature
The SSL-36B has a color temperature range
of 3000 to 5600 K.
Tap the color temperature up and down
buttons to change the color temperature in
50 K increments. Touch and hold the buttons
to rapidly adjust.
Using the SSL-36B with Battery Power
1. When attaching a V-mount battery,
make sure the power switch is in
the off position, and disconnect the
AC adapter so the control box is not
plugged into a wall outlet.
2. Align the battery terminals with the
contacts in the battery mount.
3. Place the battery into the mount, and
push the battery toward the contacts
until it clicks into place.
4. Push the 3-way power switch to the DC
position.
To connect gold-mount batteries to the control
box, use a D-tap power cable (not included).