User Manual

ManualsBrandsGenaray ManualsContinuous LightingSpectroLED 800 Bi-Color Studio LED 2-Light Kit

7

8

9

SpectroLED Studio LED Light - USER MANUAL

13

USING THE

BARNDOORS

To attach the barndoors:

1. Seat the bottom of the barndoor frame

into the two lower barndoor tabs.

2. Press down on the top of the

barndoor frame, and place it

under the two upper tabs.

3. Release the barndoor frame, and it will

lock into place in the two upper tabs.

To remove the barndoors, press down on

the top of the barndoor frame, and pull the

top of the frame out of the upper tabs. Then

lift the frame out of the two lower tabs.

The barndoors are outﬁtted with removable

silver inserts. For a less specular

interior surface, remove the inserts by

sliding them off of the barndoors.

USING THE DIFFUSER AND FILTER

The SpectroLED includes a diffuser.

A tungsten ﬁlter is included for

daylight models. To attach the

diffuser or ﬁlter, ﬁrst remove the

barndoors and follow these steps:

1. Slide the bottom edge of the diffuser/

ﬁlter under the lower barndoor tabs.

2. Slightly bend the diffuser/ﬁlter and ﬁt the

top edge under the upper barndoor tabs.

instructions