User Manual

SpectroLED Studio LED Light - USER MANUAL
12
SLEEP MODE
Sleep mode turns off the LED array without
powering off the fixture. It’s a convenient
function to use to preserve bulb life and
electricity when setting up new shots
or taking a break. For multilight setups,
the remote will put all synced fixtures to
sleep at once, saving time and effort.
To put the lights to sleep or wake
them, press and hold the D button
(daylight models) or the C and D
buttons (bi-color models).
DIMMER DOWN 25%
(DAYLIGHT MODELS ONLY:
SP-S-1200D / SP-S-800D)
This function allows for quick
power adjustments.
· With the first press of the C button,
the dimmer will jump to 100%.
· Each subsequent press will dim the light
by 25%. It will cycle from 100%, then to
75%, 50%, 25%, and back up to 100%.
REPLACING THE BATTERY
The remote operates on a 23 A, 12 V battery.
To replace the battery, access it by
removing the screw on the back of the
remote with a small Phillips screwdriver.
instructions