User Manual

SpectroLED Studio LED Light - USER MANUAL
10
Open the barndoors, and power the
fixture on. The LCD screen will show
the last setting that was used.
After powering on the light, set the
brightness and color temperature by turning
the knobs on the back of the fixture.
· Color temperature can be adjusted
from 3200 to 5600 K in 100 K
increments (bi-color models only).
· Brightness can be adjusted from
100% to 10% in 1% increments.
USING THE REMOTE
See also the Remote Function
table on the right.
The included remote can control your
SpectroLED from up to 65 feet away.
One remote can control several lights.
OPERATING THE
SPECTROLED
To sync your SpectroLED fixtures with
the remote, follow these steps:
1. Power on all SpectroLED fixtures.
2. Press and hold the A and D buttons
until you hear a confirmation
beep from the fixture(s).
Remote function Daylight Bi-Color
Synchronize A + D
(hold)
A + D
(hold)
Dimmer up A A
Dimmer down B B
Color temperature
up
– C
Color temperature
down
– D
Power On/Off D C + D
Audio Confirmation
Beep On/Off
A + B A + B
Dimmer 25%
Down*
C –
instructions