User Manual

SpectroLED Studio Barn Doors - USER MANUAL
5
ATTACHING THE
BARNDOORS
USING GELS WITH
THE BARNDOORS
1. Seat the bottom of the barndoor frame
into the two lower barndoor tabs.
2. Press down on the top of the
barndoor frame, and place it
under the two upper tabs.
3. Release the barndoor frame, and it will
lock into place in the two upper tabs.
To remove the barndoors, press down on
the top of the barndoor frame, and pull the
top of the frame out of the upper tabs. Then
lift the frame out of the two lower tabs.
1. Spread the barndoors to
the desired width.
2. Press the gel clip’s tab, and slide the
ends of the gel under the clips.
instructions