SpectroLED STUDIO 800/1200 LED LIGHT USER MANUAL
THANK YOU FOR CHOOSING GENARAY SpectroLED INTRODUCTION The Genaray SpectroLED Studio Lights provide bright, continuous light with flicker-free dimming for photography and video shoots. They’re ideal for studio work, but they’re constructed to be sturdy and durable enough for location work as well. SpectroLED fixtures are available with 800- and 1200LED arrays that can operate on AC or battery power.
· Please read and follow these instructions, and keep this manual in a safe place. · Handle the unit with care. · Keep this unit away from water and any flammable gases or liquids. · Clean the unit with only a soft, dry cloth. · Make sure the unit is powered off when plugging it into a power source. · Keep this unit away from children. · Use only the correct, recommended voltage.
Barndoors Barndoor tabs SP-S-800B/D OVERVIEW LED array Yoke Silver intensifiers Locking knob 4 SpectroLED Studio LED Light - USER MANUAL Intensifier clips
Gel clips D-tap input power socket Brightness Color temperature Product Overview Battery plate V-mount release button Tilt adjustment knobs Power switch 4-pin XLR power socket Color temperature knob (Bi-color only) Dimmer knob SpectroLED Studio LED Light - USER MANUAL 5
Barndoors Barndoor tabs SP-S-1200B/D OVERVIEW LED array Yoke Silver intensifiers 6 SpectroLED Studio LED Light - USER MANUAL Intensifier clips
Gel clips D-tap input power socket Brightness Color temperature Product Overview Battery plate V-mount release button Tilt adjustment knobs Power switch 4-pin XLR power socket Dimmer knob Color temperature knob (Bi-color only) Locking knob SpectroLED Studio LED Light - USER MANUAL 7
CONTENTS INCLUDE · AC adapter BABY-PIN STUD · AC power cord Mount the fixture on any heavy-duty light stand with a 5/8-inch baby-pin stud, and turn the locking knob until secure. Contents · Remote controller · Diffuser · Tungsten filter (Daylight models only) · Carry case · Shoulder strap 8 MOUNTING THE SPECTROLED SpectroLED Studio LED Light - USER MANUAL JUNIOR-PIN RECEIVER Remove the tilt adjustment knobs to mount the light into a 11⁄8-inch junior-pin receiver.
POWERING THE SPECTROLED USING THE SPECTROLED WITH AC POWER Important The SP-S-1200 and SP-S-800 are multivoltage fixtures capable of running on 100 to 240 V, 50/60 Hz. The included cable has a 120 V, 50 Hz (North American) plug. To use this fixture with other voltages, you must use a plug adapter (sold separately). Use the AC adapter and AC power cord to connect the fixture's 4-pin XLR socket to an AC outlet.
OPERATING THE SPECTROLED Instructions Open the barndoors, and power the fixture on. The LCD screen will show the last setting that was used. To sync your SpectroLED fixtures with the remote, follow these steps: After powering on the light, set the brightness and color temperature by turning the knobs on the back of the fixture. 2. Press and hold the A and D buttons until you hear a confirmation beep from the fixture(s).
CHANGING THE BRIGHTNESS (ALL MODELS) through the color temperature range. The A and B buttons control the brightness. Press the buttons to change the setting in 1% increments. Press and hold to rapidly scroll through the brightness range. If the lights are set at different color temperatures, the remote will change the settings incrementally while maintaining the difference in their color temperatures.
SLEEP MODE Instructions Sleep mode turns off the LED array without powering off the fixture. It’s a convenient function to use to preserve bulb life and electricity when setting up new shots or taking a break. For multilight setups, the remote will put all synced fixtures to sleep at once, saving time and effort. To put the lights to sleep or wake them, press and hold the D button (daylight models) or the C and D buttons (bi-color models).
To attach the barndoors: USING THE DIFFUSER AND FILTER 1. Seat the bottom of the barndoor frame into the two lower barndoor tabs. The SpectroLED includes a diffuser. A tungsten filter is included for daylight models. To attach the diffuser or filter, first remove the barndoors and follow these steps: 2. Press down on the top of the barndoor frame, and place it under the two upper tabs. 3. Release the barndoor frame, and it will lock into place in the two upper tabs.
PRODUCT SPECIFICATIONS SP-S-800B (Bi-Color) SP-S-800D (Daylight) Specifications LED count: 800 LEDs Maximum output power: 48 W Color temperature: Bi-Color: 3200 (±150) to 5600 K (±300 K) Daylight: 5600 K Working voltage: AC: 100–240 V, 50–60 Hz, 2.0 A DC: 12 V, 5 A Luminance: Bi-Color: 3200 K: 2000 lx 4300 K: 4500 lx 5600 K: 2665 lx Daylight: 5600 K: 5300 lx Beam angle: 45° CRI: 95 TLCI: 95 14 SpectroLED Studio LED Light - USER MANUAL Mount: 5/8in. baby pin convertible to 11⁄8 in.
LED count: 1200 LEDs Maximum output power: 72 W Color temperature: Bi-Color: 3200 (±150) to 5600 K (±300 K) Daylight: 5600 K Working voltage: AC: 100–240 V, 50–60 Hz, 2.0 A DC: 15 V, 6 A Luminance: Bi-Color: 3200 K: 2800 lx 4300 K: 6200 lx 5600 K: 3720 lx Daylight: 5600 K: 7780 lx Beam angle: 45° CRI: 95 TLCI: 95 Specifications SP-S-1200B (Bi-Color) SP-S-1200D (Daylight) Mount: 5/8in. baby pin convertible to 11⁄8 in. junior pin Battery mount: Sony V-mount Dimensions: Light only: 13.9 × 12.
ONE-YEAR LIMITED WARRANTY This Genaray product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later.
