User Manual

SpectroLED STUDIO LIGHT - USER MANUAL
17
STORING THE
LIGHT
· When you're finished using the light,
push the power switch to the Off
position. Remove the power cord from
the fixture by pressing the release
button on the top of the connector
and pulling the cord out of the fixture.
Allow a few minutes for the fixture
to cool down and then close the
barndoors to protect the fixture during
transport and storage. Always keep
the barndoors closed when the light is
not in use.
· The two horizontal barndoors contain
gel clips. You can modify the light with
a color or diffusion gel (not included).
Mount a gel by pressing down on
the spring-loaded clips, then sliding
one edge of your gel under them and
releasing the clip. The gel will be held
firmly in place. You attach the other
side of the gel on the opposite door in
the same way.
INSTRUCTIONS