User Manual

SpectroLED STUDIO LIGHT - USER MANUAL
15
· To replace the remote control's 23A
battery, use a small Phillips-head
screwdriver to remove the screw on
the back. Lift up the back plate, and
swap out the old battery for a new one.
Replace the back and securely tighten
the screw in place. Always dispose of
the old battery properly.
Daylight Bi-Color
Synchronize A + D (hold) A + D (hold)
Dimmer up A A
Dimmer down B B
Color temperature
up
– C
Color temperature
down
– D
Power On/Off D C + D
Audio Confirmation
Beep On/Off
A + B A + B
Dimmer 25%
Down*
C –
* This function allows for quick power adjustments.
With the first press of the "C" button, the dimmer
will jump to 100%. Each subsequent press will dim
the light by 25%. It will cycle from 100%, then to 75%,
50%, 25%, and back up to 100%.
INSTRUCTIONS