User Manual

SpectroLED STUDIO LIGHT - USER MANUAL
10
MOUNTING
THE LIGHT
· The removable mounting knuckle has a
ratchet handle for quick tightening and
loosening. It can be placed anywhere
along any of the four sides of the fixture,
giving you precise control over placement
of the light.
· To use the mounting knuckle, insert the
locking flange into the enlarged section
of the mounting groove that's along each
side of the fixture. Slide the knuckle to
the position you desire, and securely lock
the large locking wheel.
· With the light mounted on a light stand,
you can tilt the fixture 180° by loosening
the ratchet handle, using the tilt handle
to position the light, and then tightening
the ratchet handle. You can remove the
mounting knuckle from the fixture by
loosening the large locking wheel. Slide
the knuckle to the enlarged section at
one end of the groove, and remove the
locking flange.
INSTRUCTIONS