User Manual
SpectroLED OUTFIT LIGHT - USER MANUAL
8
SpectroLED OUTFIT LIGHT - USER MANUAL
9
SETTING UP
THE SpectroLED
OUTFIT LIGHT
· To set up the Outfit light, screw
the ballhead mount adapter into
the mounting hole on the back of
the fixture under the LED power
indicator. Tighten the adapter
securely. Then, screw the ballhead
adapter securely onto a light stand.
A 3/8" to 1/4"-20 bushing is included
for mounting the light to virtually
any light stand.
· Before using the Outfit light with
battery power, make sure that your
batteries are fully charged. Each
charging bay of the dual battery
charger features four red LED
charge indicator lights. Each of the
four LED lights on a charging bay
represents a 25% charge. When one
LED is steadily illuminated, the battery
has 25% of a full charge. Two LEDs
represents a 50% charge, three LEDs
means a 75% charge, and all four
LEDs continuously illuminated means
the battery is fully charged.
Sony-branded NP batteries
may not be fully compatible
with this Outfit light.
instructions
Note