User Manual

ManualsBrandsGenaray ManualsContinuous LightingBeacon LED Wand-Style Light

1

2

3

4

5

6

7

8

9

SpectroLED - USER MANUAL

6

INSTALLING

THE BATTERY

INSTRUCTIONS

With the battery installed, plug the

power cord into the Beacon’s AC/

DC socket and into an AC outlet. The

indicator on the adapter will glow red.

The indicator will glow green when

the battery is fully charged.

CHARGING

THE BATTERY

1. Remove the battery compartment cover.

2. Insert the battery so the contacts are

facing down into the compartment.

3. If the bottom of the battery is not

ﬂush with the bottom edge of the

battery compartment, turn the

battery until it’s properly seated.

4. Replace the battery compartment cover.