User Manual

ManualsBrandsGenaray ManualsContinuous LightingBeacon LED Wand-Style Light

7

8

9

SpectroLED - USER MANUAL

13

INSTRUCTIONS

REMOTE

OPERATION

Sleep Mode

To preserve battery life, sleep

mode can be activated via the

remote while the Beacon is in any

of the four operating modes.

To put the Beacon to sleep,

follow these steps:

1. Make sure the Beacon and the remote

are set to the same channel

2. Set the remote to Power Output mode

3. Press and hold the power button until

OF appears on the display. The LED

array will turn off.

To wake the Beacon up, press the

remote’s power button again to return

to the previous operating mode.