User Manual

ManualsBrandsGenaray ManualsContinuous LightingBeacon LED Wand-Style Light

7

8

9

SpectroLED - USER MANUAL

12

REMOTE

OPERATION

INSTRUCTIONS

Remote Power Adjustment

Refer to the Genaray Remote’s user

manual for information on channel

and operation mode selection.

To adjust the Beacon’s brightness

from the remote, follow these steps:

1. Make sure the Beacon is

in constant mode.

2. On the remote, select a channel,

1 through 4. Make sure the

remote’s channel matches

the Beacon’s channel.

3. Set the remote to Power Output mode.

4. Press and hold the remote’s + and –

buttons to adjust the

Beacon’s brightness.

When the Beacon and the remote are set

to the same channel, the remote indicator

will ﬂash when a button is pressed on

the remote. If the remote indicator does

not ﬂash, make sure the Beacon and the

remote are set to the same channel.

Note