User Manual

SpectroLED - USER MANUAL
11
INSTRUCTIONS
REMOTE
OPERATION
The Beacon’s brightness can be
controlled by the Genaray 2.4 GHz
Wireless Remote (MB-WRT, available
separately). The integrated receiver has
four channels so you can control several
Beacon fixtures from a single remote.
Channel Selection:
1. Power on the Beacon.
2. Press and hold the Power/Mode
button for approximately 3 seconds,
until the channel LEDs blink.
3. Use the up/down buttons to
select a channel, 1 through 4.
The number of blinking LEDs
indicates the channel number.
4. Press the Power/Mode button to
confirm the channel selection. The
LEDs will stop blinking and return to
indicating the remaining battery power.