SpectroLED ESSENTIAL 365/500 LIGHT USER MANUAL
Thank you for choosing Genaray. The SpectroLED Essential Bi-Color LED and Daylight LED lights have a sturdy housing that’s designed for use in the studio or on location. They produce bright, consistent light powered by DC power or by two Sony-style NP-F batteries. The panels each contain LEDs in two variations: Daylight and Bi-Color. The Daylight version generates a 5600 K daylight-balanced light. The Bi-Color version has a variable color temperature that allows you to choose from 3200 to 5600 K.
· Portable, lightweight LED light · AC/DC power · Dimming from 100% to 0% · Optional Sony NP-F battery power · Daylight version produces 5600 K light · Yoke and 1/4 in.
CONTENTS INCLUDE · Light Panel CONTENTS · Yoke · AC to DC adapter · AC power cord · Diffuser · Stacking clips (×2) 4 SpectroLED ESSENTIAL LIGHT - USER MANUAL
· Please read and follow these instructions and keep this manual in a safe place. · Do not stare directly at the lights when they are powered on. · Keep this unit away from water and all flammable gases or liquids. · Keep this unit away from children. · Use only the recommended batteries. · Do not attempt to disassemble or repair the equipment—doing so will void the warranty, and Genaray will not be responsible for any damage. · Handle the unit with care.
PRODUCT OVERVIEW Diffusion notches (4) 6 LED array Tightening knob SpectroLED ESSENTIAL LIGHT - USER MANUAL Mounting knuckle Yoke mounts and adjustment knobs (2)
NP-F battery mount PRODUCT OVERVIEW Power Dimming knob Color Temperature knob (SP-E-365/500B only) Multi Link cable ports Multi Link cable guides DC input 1/4 in.
MOUNTING THE SpectroLED ESSENTIAL LIGHTS INSTRUCTIONS · The SpectroLED Essential LED lights come with a preinstalled yoke, allowing you to easily balance and adjust the tilt of the light. The yoke can be mounted horizontally or vertically on a light stand, allowing the user to position the device in a way that the yoke doesn’t block the light. · The yoke has a standard 5/8-inch mount to fit most light stands.
· To remove the yoke, unscrew the two adjustment knobs from the sides. Note INSTRUCTIONS · The Essential-series LED lights are also equipped with stacking mounts, allowing you to connect up to three units to create a vast array of additional lighting options. To stack your units, slide the stacking clips into the stacking mounts on one of the devices. Then slide the second light to the first unit’s stacking clips. Make sure it locks in place. Repeat these steps to mount a third light.
POWERING THE LIGHTS INSTRUCTIONS · The SpectroLED Essential LED lights come with an included AC/DC cable, allowing for a nearly limitless power supply from a standard electrical outlet. To power your light, plug the AC/DC adapter into a power outlet, and the other end into your device’s DC input port on the back of the unit.
ADJUSTING THE LIGHT OUTPUT · The Bi-Color version also includes a color temperature knob, allowing you to change the color temperature from daylight (5600 K) to tungsten (3200 K). Turning the knob clockwise will adjust the color temperature towards daylight, while turning the knob counterclockwise will give the lights a warmer, tungsten light color temperature.
INSTRUCTIONS · The Essential-series LED lights come with an offset diffuser which is perfect for dispersing and softening the light output. · To install the diffuser, insert the its notches into the mounting clips on the sides of the light panel.
· The Essential-series LED lights come with two Multi Link cable ports. With the use of the optional SP-E-MLC Multi Link cable, you can control the light output of any compatible lights using the adjustment dial on the first unit in the chain. Note An Essential Bi-Color light cannot adjust the color temperature of an Essential Daylight light unit. Similarly, an Essential Daylight light cannot adjust the color temperature of an Essential Bi-Color light.
PRODUCT SPECIFICATIONS SP-E-365B (Bi-Color)/SP-E-365D (Daylight) SPECIFICATIONS LED count: 360 LED count: 504 Color temperature: 3200 to 5600 K / 5600 K Color temperature: 3200 to 5600 K / 5600 K Dimming: 100% to 0% Dimming: 100% to 0% Watts: 40 Watts: 40 Lux (@ 1 m): 1445 to 1524 / 1524 Lux (@ 1 m): 4060 to 4280 / 4280 Coverage: 60° Coverage: 60° Bulb life: 30,000 hr. Bulb life: 30,000 hr. Weight (without yoke): 1.6 lb. (0.7 kg) Weight (without yoke): 1.6 lb. (0.
ONE-YEAR LIMITED WARRANTY WARRANTY This GENARAY product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later.
GG2
