SpectroLED ESSENTIAL 360 LIGHT USER MANUAL
INTRODUCTION The SpectroLED Essential 360 Bi-Color LED and 360 Daylight LED lights have a sturdy, high-quality housing that’s designed for use in the studio or on location. It produces bright, consistent light powered by DC power or a Sony V-Mount battery. The panels each contain 360 individual LEDs in two variations: Daylight and Bi-Color. The Daylight version generates a 5600°K daylight-balanced light.
· Portable, lightweight 360-LED light · AC/DC power · Daylight version produces 5600°K light · Optional Sony V-Mount battery power · Bi-Color version has adjustable color temperature from 32005600°K · Yoke and ¼˝-20 mounting options · Dimming from 100-0% FEATURES KEY FEATURES · Ability to stack up to two units · Offset diffuser SpectroLED ESSENTIAL LIGHT - USER MANUAL 3
CONTENTS INCLUDE · Light Panel CONTENTS · Yoke · AC to DC adapter · AC power cord · Diffuser · Stacking clips (x2) · One-Year Limited Warranty 4 SpectroLED ESSENTIAL LIGHT - USER MANUAL
· Please read and follow these instructions and keep this manual in a safe place. · Do not stare directly at the lights when they are powered on. · Keep this unit away from water and all flammable gases or liquids. · Keep this unit away from children. · Use only the recommended batteries. · Do not attempt to disassemble or repair the equipment – doing so will void the warranty, and Genaray will not be responsible for any damage. · Handle the unit with care.
PRODUCT OVERVIEW Yoke mounts and adjustments knobs (2) Diffusion notches (4) 6 Tightening knob SpectroLED ESSENTIAL LIGHT - USER MANUAL Mounting knuckle LED array
Stacking mounts (4) PRODUCT OVERVIEW ¼˝-20 Threaded sockets (2) Dimming knob Color Temperature knob (SP-E-360B only) Multi Link Cable Ports Multi Link Cable guides DC input Power switch Sony V-Mount battery plate SpectroLED ESSENTIAL LIGHT - USER MANUAL 7
MOUNTING THE SpectroLED ESSENTIAL LIGHTS INSTRUCTIONS · The SpectroLED Essential LED lights come with a pre-installed yoke, allowing you to easily balance and adjust the tilt of the light. The yoke can be mounted horizontally or vertically on a light stand, allowing the user to position the device in a way that the yoke doesn’t block the light. · The yoke has a standard 5/8˝ mount to fit most light stands.
· To remove the yoke, unscrew the two adjustment knobs from the sides. Note INSTRUCTIONS · The Essential-series LED lights are also equipped with stacking mounts, allowing you to connect up to two units, creating a vast array of additional lighting options. To stack your units, slide the stacking clips into the stacking mounts on one of the devices. Then slide the second light to the first unit’s stacking clips. Repeat these steps to mount a third light. Do not stack more than two units at one time.
POWERING THE LIGHTS INSTRUCTIONS · The SpectroLED Essential LED lights come with an included AC/ DC cable, allowing for a nearly limitless power supply from a standard electrical outlet. To power your light, plug the AC/DC adapter into a power outlet, and the other end into your device’s DC input port on the back of the unit. Move the power switch from the Off position (o) to the DC On position (–).
ADJUSTING THE LIGHT OUTPUT Note The lights can also be powered using the Genaray SP-ENPBA V-lock to NP-F battery adapter (sold separately), allowing you to power the device with two NP-F batteries. INSTRUCTIONS · The SpectroLED Essential LED lights’ power output is controlled with the Dimming knob on the back of the device. Turning the knob clockwise will raise the power output, while turning the knob counterclockwise will dim it.
INSTRUCTIONS will give the lights a warmer, tungsten light color temperature. · Additionally, the Essential-series LED lights come with an offset diffuser. The diffuser is perfect for dispersing and softening the light output, and can be installed to the light horizontally or vertically for different diffusion effects. · To install the diffuser, simply insert the sides into the mounting notches on the side of the light panel.
DAISY CHAINING MULTIPLE LIGHTS · For example, you can adjust the dimming and color temperature of multiple Essential Bi-Color lights by adjusting the dials on only the first unit. The same applies to the dimming for multiple Essential Daylight lights. Note An Essential Bi-Color light cannot adjust the color temperature of an Essential Daylight light unit. Similarly, an Essential Daylight light cannot adjust the color temperature of an Essential Bi-Color light.
PRODUCT SPECIFICATIONS SP-E-360B (Bi-Color) INSTRUCTIONS LED Count: 360 LED Count: 360 Color Temperature: 3200°K to 5600°K Color Temperature: 5600°K Dimming: 100% to 0% Dimming: 100% to 0% Watts: 30 Watts: 30 Lux: 3200 @ 1m Lux: 3200 @ 1m Coverage: 60° Coverage: 60° Bulb Life: 30,000 hours Bulb Life: 30,000 hours Weight (without yoke): 2.55 lb. (1.15 kg) Weight (without yoke): 2.5 lb. (1.13 kg) Weight (with yoke): 3.6 lb. (1.63 kg) Weight (with yoke): 3.55 lb. (1.61 kg) Dimensions: 11.
ONE-YEAR LIMITED WARRANTY WARRANTY This GENARAY product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later.
GG1
