User Manual

SP-C USER MANUAL
8
INSTRUCTIONS
TRIPOD
MOUNTING
Use the 1/4 in. mounting socket to mount the
Cutlass onto a lightstand or tripod.
1
Use the 1/4 in. mounting socket to mount the
ring directly onto a lightstand or tripod.
2
Secure the battery handle to the lightstand so
it doesn’t hang freely from the ring light.
Alternative:
1. Attach the tripod mount adapter to a tripod
via the 1/4 in. mounting socket on the
bottom of the adapter.
2. Place the ring light's 1/4 in. socket onto
the adapter's post, and rotate the locking
wheel until secure.
Adjust the tilt angle by loosening the tilt
adjustment knob, repositioning the ring light,
and retightening the knob.
1
1
2
3