User Manual

Genaray SpectroLED 14 Guide | Page 9
PLUGGING INTO THE BATTERY (SOLD SEPARATELY) WITH THE INCLUDED CIGARETTE LIGHTER
ADAPTER CABLE
1. Be certain the power switches on both the LED fixture and the battery are in the
OFF position.
2. With the groove in the cable jack facing down, insert the jack into the two-pin
connection on the back of the lamp.
3. Rotate the locking collar on the jack clockwise to secure the connection.
4. Plug the male end of the cable into the battery socket.
5. Turn the LED light’s power switch to the ON position.
6. To turn the LED light on or off, use the battery’s power switch.
7. Be sure to switch both the battery and the LED light to the OFF position before
disconnecting the battery adapter cable.
Instructions