User Manual

Genaray SpectroLED 14 Guide | Page 10
MOUNTING AN UMBRELLA (SOLD SEPARATELY)
1. Insert the umbrella into the umbrella socket located in the center of the
diameter within the LED array.
2. Adjust the umbrella as necessary.
3. The pressure from the socket itself will hold the umbrella in place.
REPLACING THE FUSE
1. The Genaray SP-AD75 LED Light has a replaceable fuse. The fuse is located on
the back of the LED light, next to the two-pin connection.
2. Using a flat-headed screwdriver, push and rotate the fuse counterclockwise to
remove.
3. Remove the old fuse from the fuse holder, and insert the new fuse.
4. Use a flat-headed screwdriver to push the fuse holder in and rotate it clockwise
into place.
Visit our website at www.genaray.com for more Genaray accessories.
Instructions