User Manual

MonoBright LED Bi-Color 750 - USER MANUAL
15
ADJUSTING POWER OUTPUT
You can adjust the MonoBright’s power
output from 10%–100%. The selected
output appears on the display as
10–99, from dimmest to brightest.
To adjust power output via the control panel,
make sure the blue ( ) dimmer indicator
is glowing. If it’s not glowing, press the
dimmer knob to enter power output mode,
and the output will appear on the LED
display. Rotate the knob to adjust the output.
Adjustments are made via the control
panel’s dimmer knob. The knob is
graduated, so each notch is one
increment. Quickly moving the knob
will accelerate the speed at which you’ll
reach the top or bottom of the scale.
INSTRUCTIONS
THE CONTROL
PANEL
Bi-Color
Orange (
)
Channel
None
Power Output
Blue (
)
Channel
None
Power Output
Blue (
)
Press the knob to switch between power
output and bi-color modes. Press and hold
the knob to enter the channel mode. The
status LEDs indicate the current mode.